- ページ 7

ウォーター・ディスペンサー Coral Swan SeriesのPDF インストレーション＆オペレーティングマニュアルをオンラインで閲覧またはダウンロードできます。Coral Swan Series 15 ページ。 Cabinet

Set Time.

Press the set button. The TIME should now be flashing, use

the up and down arrows to set the correct time of day

(24hrs format). Once the correct time has been selected,

press the set button to confirm. The following will then be

displayed.

Set Day of the Week.

Press the set button to display the screen shown. The

display will flash, use the up and down buttons to advance

the arrow to underneath the correct day. Once under the

correct day press the set button to confirm. The following

will then be displayed.

Salt Setting

The system should have been pre-programmed to the

required setting but may need altering or resetting,

the default amount is 110 grams/Ltr.

To reset this press the set button to start the display

flashing and adjust the setting using the up and down

arrows to the correct setting (see 5.2)

On the 740 & 760 control you have options of S, L or H.

Time when system Regenerates.

This normally defaults to 2.00am but can easily be changed

to a more suitable time if required by pressing the square

set button to start the display flashing, adjusting the time

using the up and down arrows then press the square set

button to confirm. The following will then be displayed.

Calendar Override Days.

The system should have this pre-programmed to a

suggested number of days but this may need altering to suit

your needs. This function allows the filter bed to backwash

regardless of usage; this is to ensure that the filter bed

remains fresh.

Press the set button to start the display flashing then alter

the figure using the up and down arrows, then press the set

button to confirm the setting.

740 & 742 (Time) Controllers rely totally on this setting.