ページを印刷する
H O W
T O
M A I N T A I N
How to maintain your
phone's connection
Handset Connection
To supply power and an internet connection to your handset, ensure
you connect the Ethernet Cable and Power Supply Unit Lead into the
correct ports, as shown below. Your Receiver Curly Cord can also be
plugged directly into your HiHi2 base unit.
Connect PC
USB
to this port
(optional)
Slot
PC
Power Supply
Unit Lead
Receiver
Ethernet
Curly Cord
Cable
12
Y O U R
H i H i
D E S K P H O N E
H O W
T O
M A I N T A I N
Ethernet and WiFi Connection
You can confirm if your HiHi2 is connected via Ethernet or WiFi by checking if the symbols are
visible in the top right-hand corner of the screen.
Next to the battery icon, you may see a variation of some of the below symbols, depending on
the status of your connection.
Ethernet Cable
Connected
Receiver
You can setup a WiFi Connection by following the below steps:
1) Swipe up from the bottom of the homescreen to display all the applications on your device.
Select the
Settings
2) Select WiFi. This will display a list of available WiFi networks that you can connect to.
3) Select the WiFi network you would like to connect to. A pop-up will appear asking for the
password. Enter the password and then press Connect.
4) If successful, it will display as Connected. Your HiHi2 is now connected to the internet.
Y O U R
P H O N E ' S
5
5
WiFi Network
Connected
icon. Select the top option,
Network &
Internet.
C O N N E C T I O N
No WiFi Network
Connected
13