- ページ 3
コントロールユニット Galvin Safe-Cell 50112CのPDF 製品インストール・マニュアリンをオンラインで閲覧またはダウンロードできます。Galvin Safe-Cell 50112C 4 ページ。 Manual prison tapware
1. Disassembly
Disassemble components, leaving bottom
nut on the body.
Do not remove the ceramic cartridge
3. Fit dress flange
Fit onto dress flange and hand tighten.
Tighten bottom nut
Tighten nuts holding the breach piece.
5. Fit lock sleeve
Fit lock sleeve and tighten to lock entire
unit in position.
Version 2, 13 June 2017, Page 3 of 4
2. Fit basin body
Insert the basin body assembly up through the pre-
cut hole.
4. Fit dress flange with Anti-Rotation pin
If the anti-rotation option is required, fit dress flange
onto body and mark the basin/sink, remove the flange
and drill 3/16" hole
Replace the flange and screw in the grub screw to lock.
6. Assemble handle and test
Fit handle with tamper proof screw, ensure the correct
water temperature identification button is in the handle
Screw must be tightened before the unit is tested
Once temperature indicator is fitted, check the
operation of the unit and inspect for any leaks.