- ページ 6

カードリーダー Dynex DX-CR112のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dynex DX-CR112 11 ページ。 Lecteur de cartes mémoire sd/microsd
Dynex DX-CR112 にも：マニュアル (6 ページ), ユーザーマニュアル (11 ページ), よくある質問 (5 ページ), クイック・セットアップ・マニュアル (2 ページ), (ユーザーガイド (11 ページ), (フランス語) 取扱説明書 (11 ページ)

Data LED

Indicates when a slot is reading from or writing to a card.

• LED off–Your card reader is not being used

• LED on–A card is inserted in one of the slots

• LED flashing–Data is being transferred to or from a card and the hard drive or another

card

Formatting a memory card (Windows)

Caution: Formatting a memory card permanently deletes all files on the card. Be sure that

If your computer has trouble recognizing a new memory card, format the memory card in

your device (refer to the documentation that came with the device) or by using the following

procedure.

To format a memory card:

1 Click Start, then click My Computer or Computer.

2 Under Removable Storage, right-click the appropriate memory card drive.

3 Select Format.

4 Type a name into the Volume Label box. The name of your memory card appears

next to the drive.

5 Click Start, then click OK in the Warning dialog box.

6 Click OK on the Format Complete window.

7 Click Close to finish.

Formatting a memory card (Macintosh)

Caution: Formatting a memory card permanently deletes all files on the card. Be sure that

If your computer has trouble recognizing a new memory card, format the memory card in

your device or by using the computer.

To format a memory card:

1 Click Go, then click Utilities.

2 Double-click Disk Utility from the list.

3 In the left-hand column, select the memory card you want to format, then click the

Erase tab.

4 Specify a volume format and name for the memory card, then click Erase. A warning

box opens.

5 Click Erase again. The Erase process takes a minute or so to erase and reformat your

memory card.

you copy any valued files to a computer before formatting a memory card. Do not

disconnect the card reader or remove the memory card while formatting is in progress.

you copy any valued files to a computer before formatting a memory card. Do not

disconnect the card reader or remove the memory card while formatting is in progress.

DX-CR112