- ページ 3

防犯カメラ hikam A7のPDF 初期設定用クイックマニュアルをオンラインで閲覧またはダウンロードできます。hikam A7 10 ページ。 Smart home wireless ip-kamera
hikam A7 にも：クイック・スタート・マニュアル (6 ページ)

A7 IP Camera

The Camera for Secure Home.

Quick Guide for Initial Setup (v6.0/09.2017)

English

Before starting setup

Step 1: Make sure of the following:

- Your router supports the 2.4GHz frequency band.

- Your smartphone is connected to the Internet with a WLAN/Wi-Fi that the camera will connects with.

- You smartphone, camera, and router should be within approximately 9 feet during setup. After your camera is set up,

you can move the camera to your preferred location.

- You know the WLAN/Wi-Fi password.

Step 2: Download and install HiKam App. Go directly to Step 3 if the HiKam app is already in your smartphone.

- Get HiKam App from App Store (iPhone/iPad) or Google Play (Android), search "HiKam camera".

- Create your account in the app.

(see picture 1)

Step 3: Start camera

- Remove the camera from its packaging and thread the two antennas to their corresponding labeled connectors.

- Connect the power cord to power on the camera.

- Wait for camera to beep.

If beeping is not heard within one minute press and hold the reset button till a successful reset signal, which is a metallic

clash sound, is heard. Wait another 30 seconds for the camera completing reset. The camera will then start beeping.

You can choose either setup via wireless (see Setup Mode 1) or via an Ethernet cable (see Setup Mode 2).

Setup Mode 1: Set up using 'AirLink'

- Log in HiKam app and follow picture 2 through 4. The app will guide you through configurations step by step.

Picture 1

Picture 2

Picture 3

Picture 4

Picture 5

Picture 6

- After click "Next" button

the app starts to configure the camera with Wi-Fi. Once the camera receives all

(see picture 4)

configurations from your smartphone, you will hear a sound ("Dong...") signifying that your camera has begun to

connect to the app server through the Wi-Fi router. Once connection is completed you will see the notify "WiFi

configuration successful" in the app, otherwise you will see "Airlink Timeout". In the latter case try one more time. If the

connection fails to complete again, move to Setup Mode 2.

- You will be asked to name the camera and to enter the initial password 123

(see picture 5).

- You will then be asked to enter a new password for your camera, consisting of 6-30 characters

(see picture 6).

successful operation will be notified by "Modify successfully" in the app. If this does not happen within one minute, force

quit the app, reset your camera by pressing and hold the reset button, and move to Setup Mode 2.

- You can now follow the live video stream on your smartphone.