- ページ 8

ガス検知器 AGS Mini MerlinのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AGS Mini Merlin 16 ページ。 Ch4 co: dual gas detector methane & carbon monoxide
AGS Mini Merlin にも： インストレーション＆オペレーションマニュアル (16 ページ), インストレーション オペレーション＆メンテナンス (20 ページ)

ページを印刷する
AGS Mini Merlin ユーザーマニュアル
MINI MERLIN CH4CO
6.
Installation & Location
This device is designed for surface mounting using 2 mounting screws (not supplied) and MUST
be installed by a licensed insured contractor. Mark the location of the two holes needed on
the wall using the back plate as a template. Placing at eye level allows for optimum monitoring
of the digital display screen, or as guide, 5 feet (1.5 meters) from ground level.
Back Plate
Removing the back plate gives access to the circuit board.
There are also two 'knock outs' for electrical wiring access & a divider to separate low and
high voltage connections.
Recommended Installation Locations
The device should be mounted near the
boiler or gas fired appliance/s such as
domestic and commercial boiler rooms and basements.
When choosing your location, make sure you are able to hear the alarm from all areas.
DO place the device at eye level to optimise monitoring of the digital display.
DO place out of reach of children.
AVOID installation within 6 feet (2 metres) of heating or cooking appliances.
AVOID Installation near any ventilation openings, i.e. vents, chimneys, windows etc.
AVOID installation near ceiling fans, windows or areas exposed to direct weather.
Rev: 08 05-19
Do not remove the Circuit Board!
This will void any warranty.
USER GUIDE
8