屋外ライト Adesso BONNIE TABLE LANTERNのPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Adesso BONNIE TABLE LANTERN 2 ページ。
ページを印刷する
Metal plate
Knurled
knob switch
Rubber pad
Rotary stick
ASSEMBLY INSTRUCTIONS FOR
BONNIE TABLE LANTERN
Model # 6031
1. Place the metal plate onto the base by aligning
the hole on the metal plate over the rotary stick.
Then assemble the rubber pad and the knurled
knob switch and screw clockwise until tight.
2. Install the bulb (Not Included) by screwing it
into the socket. Refer to the label on the lamp
socket for maximum wattage information.
Bulb (Not Included)
60 Watt
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will
fit in a polarized outlet only one way. If the plug
Base
does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified
electrician. Never use with an extension cord
unless plug can be fully inserted.
DO NOT ALTER THE PLUG.
BULB TYPE: (1) 60Watt
Plug
(1) Rubber pad
(1) Knurled knob switch
6031
PARTS DIAGRAM:
353 West 39th Street – 2nd Floor
New York, NY 10018
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
1.0