- ページ 3

ガーデンハウス Galvo Shed GVO1515のPDF 組み立て説明書をオンラインで閲覧またはダウンロードできます。Galvo Shed GVO1515 4 ページ。 1.53m l x 1.53m w x 1.98-1.83m h sloping roof garden shed

ページを印刷する

GVO1515

page 3 -

2: Back Wall

You need:

2 x (e) Channels

2 x (a) Sheets

(e)

3: Roof

You need:

2 x (e) Channels

2 x (a) Sheets

2 x (i) "L"s

4: End Walls

You need:

2 x (f) Channels

2 x (b) Sheets

(b)

(f)

If you choose to vary from these instructions your warranty will be impaired.

(a)

(j)

(e)

(a)

(e)

(i)

(a)

(f)

Channels will end

20 - 30mm short

at tops of end

walls and 15 - 20

at bottoms

A. Join 2 (a) sheets together with

2 fixings thru the overlapping

ribs making sure the ends of the

sheets are flush.

B. Cap sheeting with (e) chan-

nels .

C. Fix the channels thru the end

ribs and every 2nd rib between.

D. Make sure you put at least 1

fixing per sheet up thru the un-

derside of the channel into the

pan of the sheet.

A. Join 2 (a) sheets together same as

the back.

B. Cap sheeting with (e) 1515mm

channels.

C. Fix the channels every 2nd rib but

not the corners at this stage

D. Place the short flange of (j) the "L"

on top of the rib at 1 end. Make

sure ends are flush with sheeting

and put 1 fixing in the centre to

hold the "L". Fix the corners thru

the channels and 1 more between

the corner and the centre fixing.

Perform the same at the other

end. 5 fixings ea "L"

A. Join 2 Left (b) sheets together

to give a slope at the top.

B. Cap sheeting with (f) 1485mm

channels.

C. Fix the channels through the

end ribs and every 2nd rib be-

tween.

D. Make sure you put at least 1

fixing per sheet up through the

underside of the channel into

the pan of the sheet.

E. Perform the same again for

the Right side.