- ページ 5

バスルーム設備 Coram Showers PREMIERのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Coram Showers PREMIER 16 ページ。 Double sliding door / side panel
Coram Showers PREMIER にも：インストレーション・インストラクション (4 ページ)

ページを印刷する

Check the door frame is vertical and is centrally positioned between the wall channels.

From inside the enclosure, in the positions shown, drill through the wall channels into the fixed panels using a 3mm drill bit,

do not drill too deep! Fix using 6 x 10mm screws.

PN40308

Fixed

panel

bracket

Fit 'flipper seals' (PN40308) onto the edge of the fixed

panels. Ensure the flipper seal 'flaps' are on the

inside. Note: Wetting the glass with water will help to

fit the seals.

From inside the enclosure, place fixed panel retainer

covers (PN80618) onto the top and bottom fixed

panel brackets. Fix using the 12mm screws and fit the

retainer caps (PN50370).

From inside

PN50370

12mm

PN80618

Inside

PN40311

40309

Outside

face of

door

Door

handle

holes

Push fit 'flipper seals' (PN40309) onto the back edge of the doors.

Ensure the flipper seal 'flaps' are on the outside of the doors.

Push fit 'magnetic seals' (PN40311) onto the closing edge of the

doors (the same side as door handle holes).

Note: Ensure the magnetic seals are positioned as shown.

Note: Wetting the glass with water will help fit the seals.

ø 3

10mm

PN40309

PN40311

Outside

face of

door

Door

handle

PN40311

holes