- ページ 2
シャワーキャビン Coram Showers OPTIMA PIVOT DOORのPDF 使用方法をオンラインで閲覧またはダウンロードできます。Coram Showers OPTIMA PIVOT DOOR 4 ページ。
ページを印刷するCheck contents of pack before installation. If anything is
missing, contact our Customer Careline for assistance.
CUSTOMER CARELINE: 01746 713410
PN3230
8
PN3225
8
32mm
PN3222
6
10mm
1
a
=
100mm
max
a: Drill holes in both wall channels at points shown using a 4.5mm drill bit, where shown.
b: Ensure the shower tray is level in all directions. IMPORTANT: Clean the tray and seal the gap between the tray surface and tiles. It is
important that the tray is sealed right up to the tray edge so that the bottom of the wall channel is sealed. Failure to do this will cause water to
leak under the wall channel and between the tray and tiles, resulting in damp patches on the wall and under the tray.
2
Fit the door handles to the door ensuring the supplied handle
washers are used on each side of the glass. A chrome finish handle
is supplied for all frame finish options.
2
PN4748
14
PN80519
1
700 = PN40222
760 = PN40223
800 = PN40224
1
900 = PN40225
100mm
max
=
=
ø 4.5
mm
PN10801
b
3
Choose which side you want the door to open at (turn the door
over if necessary).
PN10801