- ページ 2
シャワーキャビン Coram Showers OPTIMA SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Coram Showers OPTIMA Series 16 ページ。
ページを印刷するCheck contents of pack before installation. If anything is
missing, contact our Customer Careline for assistance.
CUSTOMER CARELINE: 01746 713410
PN3230
PN3225
32mm
PN60014
13mm
PN3222
10mm
PN4748
PN50103
PN4745
PN60418
1
a
=
100mm
max
a: Drill holes in both wall channels at points shown using a 4.5mm drill bit, where shown.
b: Ensure the shower tray is level in all directions. IMPORTANT: Clean the tray and seal the gap between the tray surface and tiles.
It is important that the tray is sealed right up to the tray edge so that the bottom of the wall channel is sealed. Failure to do this will
cause water to leak under the wall channel and between the tray and tiles, resulting in damp patches on the wall and under the tray.
2
2
PN80519
8
1000 = PN40261
8
1200 = PN40262
1400 = PN40263
2
PN40260
10
PN40258
14
PN40259
4
PN40010
4
PN50382
1
PN60058
=
=
ø 4.5
mm
1
PN10801
2
1
1
1
1
2
1
b
100mm
max
The enclosure can be assembled with the door on
either the right or left side of the assembly (see step 6).
Note: The following instructions show the enclosure
with the door on the right hand side.
1000 RAIL - PN80528
1200 RAIL - PN80529
1400 RAIL - PN80530
1000 RAIL - PN80528
1200 RAIL - PN80529
1400 RAIL - PN80530
PN10801