- ページ 9
シャワーキャビン Coram Showers PREMIERのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Coram Showers PREMIER 16 ページ。 Double sliding door / side panel
Coram Showers PREMIER にも： インストレーション・インストラクション (4 ページ)
ページを印刷するCheck contents of packs before installation. If anything is
missing, contact our Customer Careline: 01746 713410
SLIDING DOOR CONTENTS
PN3230
PN3225
32mm
PN60014
2
13mm
PN60093
4
12mm
PN3222
10mm
PN50359
6
PN50370
4
PN80618
4
1
a
=
100mm
max
a: Drill holes in both wall channels at the points shown (in the groove) using a 4.5mm drill bit.
b: Ensure the shower tray is level in all directions. IMPORTANT: Clean the tray and seal the gap between the tray surface and tiles.
It is important that the tray is sealed right up to the tray edge so that the bottom of the wall channel is sealed. Failure to do this will
cause water to leak under the wall channel and between the tray and tiles, resulting in damp patches on the wall and under the tray.
2
PN60220
8
1500 =
PN40272
8
1700 =
PN40273
PN40308
PN40311
6
PN40309
PN60162
PN4745
=
=
ø 4.5
mm
PN11031
2
4
2
2
PN11029
2
1
8
b
100mm
max
The enclosure can be assembled with the side
panel on either the right or left (see step 4).
Note: The following instructions show the
enclosure with the side panel on the left.
1500 RAIL - PN80599
1700 RAIL - PN80600
PN11032
PN11030
SIDE PANEL CONTENTS
PN3222
6
10mm
PN50359
3
PN11031
PN11029
1500 RAIL - PN80599
1700 RAIL - PN80600
1
PN80522
2
9