- ページ 2

バイクアクセサリー Dynojet Power Commander IIIのPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。Dynojet Power Commander III 4 ページ。 Fuel adjustment
Dynojet Power Commander III にも: インストレーション・インストラクション (4 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (5 ページ), インストレーション・インストラクション (5 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (4 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (5 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (3 ページ), インストレーション・インストラクション (4 ページ), インストール手順 (5 ページ), インストレーション・インストラクション (4 ページ)

Dynojet Power Commander III インストレーション・インストラクション
Remove these
i802-511
www.powercommander.com
7/16" bolt
1
2
3
4
5
6
7
8
1999-2001 EFI Harley-Davidson Twin Cam 88 Touring Model - PCIII USB - 2
Remove the seat.
Remove saddlebags if installed.
Remove left and right side covers.
Remove the battery (negative terminal
first).
Loosen the two 7/16 nuts that retain
the ECM (Fig. A)
From the left side (underneath the left
side cover area) feed the PCIII con-
nectors in front of battery tray, and
out the right side (in front of the ECM
bracket) ( Fig. B).
Attach PCIII module to battery box.
First, clean the PCIII and battery box
with the supplied alcohol wipe. Using
the supplied velcro attach PCIII to the
battery box. Also, secure the unit
with the included zip ties. If your
bike has cruise control, attach the unit
to the face of the cruise control mod-
ule (Fig. C).
Disconnect the large connector from
the ECM. Remove the rubber dust
shield.