- ページ 9

コントロールパネル AGS Merlin 1500SのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。AGS Merlin 1500S 12 ページ。 Gas & ventilation interlock system
AGS Merlin 1500S にも： ユーザー・インストール・マニュアル (8 ページ), インストレーション＆オペレーションマニュアル (12 ページ)

ページを印刷する
AGS Merlin 1500S ユーザーマニュアル
Merlin 1500S
Fan Fault
Under normal working conditions this LED is off. If a fan fault is present for more than 20 seconds,
the LED will illuminate RED.
OFF = OK
ON = the gas supply has been shut off due to a ventilation fault.
IF A FAULT IS FOUND YOU WILL NEED TO CONTACT YOUR SERVICE/MAINTENANCE COMPANY.
YOU SHOULD NOT ATTEMPT TO CARRY OUT A REPAIR UNLESS YOU ARE QUALIFIED TO DO SO.
EM Stop
If an emergency shut off button (either remote or on the panel) is pressed, the LED will illuminate
AMBER and the gas turned off. The EM Stop button must be re-set before restarting the system.
OFF = OK
ON = EM Stop button pressed
Gas Detected
Under normal working conditions this LED is off. If the external Merlin detector connected detects
gas this will show RED and the Gas valve will turn off.
OFF = OK
ON = Gas detected.
CO
High
2
Under normal working conditions this LED is off. If the concentration of CO2 in the air is at
alarm level (relevant detector required), the LED will show RED and the Gas valve will turn off.
OFF = OK
ON = the concentration of CO2 is at alarm level.
Rev: 07
05-19
User Guide
9