- ページ 7
バイクアクセサリー Dynojet POWER VISION 3のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dynojet POWER VISION 3 9 ページ。 2020-2021 honda rubicon/foreman/trx520
Dynojet POWER VISION 3 にも： インストレーション・マニュアル (7 ページ), インストレーション・マニュアル (8 ページ), インストレーション・マニュアル (8 ページ)
ページを印刷する
CHANGING THE SETTINGS
This menu allows you to rotate the screen allowing you to
change the orientation of the Power Vision device along with
adjusting the screen brightness. Turn the brightness up and
make your screen pop!
Select Device Tools>Settings>Rotate Screen to fl ip the
screen.
Select Device Tools>Settings>Brightness to change the
screen brightness.
UPDATING THE DEVICE
This menu allows you to update the device with the latest fi rmware.
1
Go to www.dynojet.com.
2
From the top navigation menu, select Support>Downloads.
3
Click Power Vision 3.
4
Click the Firmware drop-down and download the Power Vision 3
Firmware for Harley-Davidson.
5
Save the fi le to your device.
6
Select Device Tools>Update Device.
DIAGNOSTIC ENABLE
This menu allows you to create a fi le containing device
diagnostic information used by Dynojet Tech Support.
1
From the Main Menu, select Device Tools>Diagnostic Enable.
This will turn on diagnostic logging. Logging will continue until
the device is restarted.
2
If requested by Dynojet Tech Support, connect your Power
Vision to a computer and email the diagnostic fi le to
[email protected]. Diagnostic log fi les are placed in the
log fi les directory.
USB MODE
This menu allows you to connect your Power Vision to your
computer and enables sending and receiving fi les.
1
Connect the Power Vision to your computer using the included
USB cable. The Power Vision will automatically enter USB Mode.
OR
From the Main Menu, select USB Mode.
2
Transfer the desired fi les to your computer or to the Power
Vision.
MAIN MENU
TUNING
VEHICLE TOOLS
DEVICE TOOLS
DEVICE TOOLS
SETTINGS
UPDATE DEVICE
DIAGNOSTIC ENABLE
USB MODE
MAIN MENU
DEVICE TOOLS
USB FILE TRANSFER ENABLED
HELP
USB MODE
PRESS
UPDATE DEVICE
PV3_3.9.8297.19316.dfu
TO EXIT
7