- ページ 10

ペイントスプレー GAMA Master SeriesのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。GAMA Master Series 20 ページ。

MAINTENANCE

To obtain maximum output from your MASTER gun, it is necessary to periodically perform

certain maintenance operations.

To prevent possible injury caused by incorrect handling of the raw

materials and solvents used in the process, carefully read the safety data

sheet provided by your supplier.

Deal with the waste caused according to current regulations.

To prevent serious damage caused by the impact of pressurised fluids,

never open a connection or perform maintenance work on components

subject to pressure until all pressure has been eliminated.

Use suitable protection when operating, maintaining or being present in

the area where the equipment is functioning. This includes, but is not

limited to, the use of protective goggles, gloves, shoes and safety

clothing and breathing equipment.

The equipment includes components that reach high temperatures and

can cause burns. Hot parts of the equipment must not be handled or

touched until they have cooled completely.

To prevent serious injury through crushing or amputation, do not work

with the equipment without the safety guards installed on the moving

parts. Make sure that all the safety guards are correctly reinstalled at the

end of the repair or maintenance work of the equipment.

10/20

1.5 Issue

http://www.gamapur.com

Service Manual

Ref. NR-00008-ENG