- ページ 19

ペイントスプレー GAMA Master SeriesのPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。GAMA Master Series 20 ページ。

Service Manual

WARNING:

To Warranty that the cylinder block is well-fitted,

make sure that the retention ring is perfectly fitted in the fixing

groove.

avoid

possible

errors

assembly,

avoid

approaching the end cap when applying pressure to the gun

after cleaning, repair or maintenance operations.

Install the cylinder clamp.

Hand-tighten the mix chamber while holding the end of the

pneumatic cylinder with a spanner.

Assemble the gun block by sliding it over the chamber and fix it to the

gun with the bolts. Make sure to fit the o-ring between the block and

the fixing plate and replace it if it is damaged. Tighten alternately to

avoid possible leaks.

Assemble the side blocks to the gun block with the corresponding

bolts.

Tighten alternately to avoid possible leaks. Screw on the

diffuser.

The gun is now ready for service.

19/20

1.5 Issue

Ref. NR-00008-ENG

http://www.gamapur.com