- ページ 5

サーマルカメラ Hikmicro E SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Hikmicro E Series 16 ページ。 Handheld thermography camera

ページを印刷する

Battery

● The built-in battery cannot be dismantled. Please

contact the manufacture for repair if necessary.

● For long-term storage of the battery, make sure it is

fully charged every half year to ensure the battery

quality. Otherwise, damage may occur.

● Make sure the plug is properly connected to the

power socket.

● When the device is powered off and the RTC

battery is full, the time settings can be kept for 15

days.

In the first use, power on the device and charge

●

the RTC battery

than 8 hours.

● The standard adapter power supply is 5 V.

● The battery is certified by UL2054.

Maintenance

● If the product does not work properly, please

contact your dealer or the nearest service center.

We shall not assume any responsibility for

problems caused by unauthorized repair or

maintenance.

● Wipe the device gently with a clean cloth and a

small quantity of ethanol, if necessary.

● If the equipment is used in a manner not specified

by the manufacturer, the protection provided by

the device may be impaired.

● We recommend you send the device back for

calibration once a year, and please contact the local

dealer for the information on maintenance points.

● Your camera will periodically perform a self-

calibration to optimize image quality and

measurement accuracy. In this process the image

will pause briefly and you'll hear a "click" as a

shutter moves in front of the detector. The self-

calibration will be more frequent during start up or

in very cold or hot environments. This is a normal

part of operation to ensure optimum performance

for your camera.

Calibration Service

We recommend you send the device back for

calibration once a year, and please contact the local

dealer for the information on maintenance points.

For more detailed calibration services, please refer to

HIKMICRO official website.

Using Environment

● Make sure the running environment meets the

requirement of the device. The operating

temperature shall be -10 °C to 50 °C (14 °F to

122 °F), and the operating humidity shall be 95% or

less.

● DO NOT expose the device to high electromagnetic

radiation or dusty environments.

● DO NOT aim the lens at the sun or any other bright

light.

● When any laser equipment is in use, make sure that

the device lens is not exposed to the laser beam, or

it may burn out.

● The device is suitable for indoor and outdoor uses,

but do not expose it in wet conditions.

● The level of protection is IP 54.

● The pollution degree is 2.

with the lithium battery

for more