- ページ 7

サーマルカメラ Hikmicro HM-TD2H67T-6/XのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Hikmicro HM-TD2H67T-6/X 9 ページ。 Heat resistant bullet camera

ページを印刷する

socket.

● The socket-outlet shall be installed near the equipment and

shall be easily accessible.

● DO NOT connect multiple devices to one power adapter, to

avoid over-heating or fire hazards caused by overload.

● DO NOT touch the bare metal contacts of the inlets after the

circuit breaker is turned off. Electricity still exists.

● + identifies the positive terminal(s) of equipment which is

used with, or generates direct current. - identifies the

negative terminal(s) of equipment which is used with, or

generates direct current.

Battery

● CAUTION: Risk of explosion if the battery is replaced by an

incorrect type.

● Dispose of used batteries according to the instructions.

● Improper replacement of the battery with an incorrect type

may defeat a safeguard (for example, in the case of some

lithium battery types).

● Do not dispose of the battery into fire or a hot oven, or

mechanically crush or cut the battery, which may result in an

explosion.

● Do not leave the battery in an extremely high temperature

surrounding environment, which may result in an explosion

or the leakage of flammable liquid or gas.

● DO NOT subject the battery to extremely low air pressure,

which may result in an explosion or the leakage of flammable

liquid or gas.

Installation

● Never place the equipment in an unstable location. The

equipment may fall, causing serious personal injury or death.

● This equipment is for use only with corresponding brackets.

Heat Resistant Bullet Camera · Quick Start Guide

Use with other (carts, stands, or carriers) may result in

instability causing injury.

System Security

● You acknowledge that the nature of Internet provides for

inherent security risks, and our company shall not take any

responsibilities for abnormal operation, privacy leakage or

other damages resulting from cyber attack, hacker attack,

however, our company will provide timely technical support

if required.

● Please enforce the protection for the personal information

and the data security as the device may be confronted with

the network security problems when it is connected to the

Internet. Please contact us when the device might exist

network security risks.

● Please understand that you have the responsibility to

configure all the passwords and other security settings about

the device, and keep your user name and password.

Maintenance

● If the product does not work properly, please contact your

dealer or the nearest service center. We shall not assume

any responsibility for problems caused by unauthorized

repair or maintenance.

● A few device components (e.g., electrolytic capacitor) require

regular replacement. The average lifespan varies, so periodic

checking is recommended. Contact your dealer for details.

● Wipe the device gently with a clean cloth and a small

quantity of ethanol, if necessary.

● If the equipment is used in a manner not specified by the

manufacturer, the protection provided by the device may be

impaired.

● To reduce the risk of fire, replace only with the same type

and rating of fuse.

● The serial port of the equipment is used for debugging only.

Using Environment

● Make sure the running environment meets the requirement

of the device. The operating temperature shall be 0 °C to

200 °C (32 °F to 392 °F),

depending on the installation

and humidity shall be 95% or less.

● Place the device in a dry and well-ventilated environment.

● DO NOT expose the device to high electromagnetic radiation

or dusty environments.

● DO NOT aim the lens at the sun or any other bright light.

● The equipment shall not be exposed to dripping or splashing

and that no objects filled with liquids, such as vases, shall be

placed on the equipment.

● No naked flame sources, such as lighted candles, should be

placed on the equipment.

● Provide a surge suppressor at the inlet opening of the

equipment under special conditions such as the mountain

top, iron tower, and forest.

● Burned fingers when handling the parts with symbol

Wait one-half hour after switching off before handling the

parts.

Emergency

● If smoke, odor, or noise arises from the device, immediately

turn off the power, unplug the power cable, and contact the

service center.

COMPLIANCE NOTICE: The thermal series products might be

subject to export controls in various countries or regions,

including without limitation, the United States, European Union,

system,