ページを印刷するTo ensure adequate ventilation, allow the clearances
shown in figure 2.
2
50-min. cm
200
D027
Push appliance into housing until stop strip (A) touch-
es the kitchen unit.
A
D023
If after having carried out the previously described op-
eration there is still some space left between the ap-
pliance and the kitchen unit, fit the trimming provided
together with the appliance on the stop strip (A).
A
D265
14
Fig. 2
min.
2
200
cm
Fig. 3
Fig. 4
Open the door and push the appliance against the
side of the kitchen unit opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the kit
included with the appliance. Snap vent grille (C) and
hinge cover (D) into position.
D
D388
Press in the joint covers between the appliance and
the kitchen unit.
D098
Apply covers (B) on joint cover lugs and into hinge
holes.
D339
Fig. 5
C
Fig. 6
Fig. 7
B