- ページ 8

ボイラー Main Combi 24 HEのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Main Combi 24 HE 12 ページ。 Wall mounted combination boiler gas fired central heating unit
Main Combi 24 HE にも：取扱説明書および重要な保証情報 (12 ページ)

ページを印刷する

Supplied by HeatingSpares247.com

5mm Min

450mm Min

For Servicing

Purposes

5mm Min

Fig. 4

450mm

Reset

Burner On

Flame Failure

Power On

bar

In Operation

5.0 Clearances & Cleaning

20mm/5mm Min

5.1

For your Safety

see *NOTE:

1. This appliance must have been installed in accordance

with the manufacturer's instructions and the regulations

in force.

200mm Min

2. Any modification that may interfere with the normal

operation of the appliance without express written

permission from the manufacturer or his agent could

invalidate the appliance warranty. In GB this could also

infringe the Gas Safety (Installation and Use) Regulations.

GB - Heating Industry definition meaning England, Scotland,

Wales, Northern Ireland, Isle of Man and the Channel Isles

3. Your boiler must not be operated without the casing

correctly fitted.

4. Do not interfere with any sealed components on this

780mm

boiler.

5. Take note of any warning labels on your boiler.

6. Your boiler should have the following minimum

clearances for Safety and Maintenance

(Fig. 34):-

Top

Bottom

Left side

Right Side

200mm Min

Front

* NOTE: The boiler can be operated with a

clearance of 5mm at the right. This is also sufficient

for routine maintenance. However a clearance of

20mm is required if it is necessary to remove the

secondary heat exchanger. This should be considered

when siting the appliance and in the event of any

subsequent alteration in the area of installation.

7. If your boiler is installed in a compartment, do not use

it for storage purposes. Do not obstruct any purpose

provided ventilation openings.

8. Flammable materials must not be stored in close

proximity to your boiler.

9. Avoid skin contact when your boiler is in operation, as

some surfaces may get hot e.g. pipework.

10. Ensure that the flue terminal, outside the house,

does not become damaged or obstructed, particularly

by foliage.

11. It is important that the condensate drain system is

not blocked, modified or damaged in any way as this

would affect the operation of your boiler. Your installer

should have insulated any exposed pipework.

5.2

Cleaning the Outer case

The painted panels should be wiped with a damp cloth

and then dried completely. DO NOT USE ABRASIVE

CLEANING AGENTS.

- 200mm

- 5mm

- 5mm (In Operation)

- 450mm (For Servicing)