- ページ 6

照明器具 Main Access 200601TのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Main Access 200601T 7 ページ。
Main Access 200601T にも：組立説明書 (12 ページ)

Step 21: Pool Installation

Note: Two people are required for installation.

A total weight of approximately 100 lbs. is

required to keep the step from moving once in

place under water. With the assistance of another

person, carefully place the step in the pool. Place

the two sealed bags of sand (not included) in

ballast bags (M) over the ballast tray (D) to hold

the step in place. Walk step back againast the pool

wall to prevent swim behind hazards.

*Optional* Purchase (2) Anchors (#200888) to weigh

down the iStep. Sand not inlcuded.

For Questions Regarding Installation, Please Contact Main Access Customer Service 1-888-333-1134 or

Model #200601T Assmebly Instructions

Step 22: Deck Mount Installation

With the step in position close to the pool wall,

slide the deck connectors (H) intstallation position

on either the pool top seat or pool deck. Secure to

the deck with two #8 x 1" screws (N). Use a

minimum of two screws per deck connector.

Secure each deck connector (H) to each upper

handrail (E1) by using a single #8 x 1" screw.

All Finished!

iSTEP