- ページ 6

照明器具 Main Access 200601TのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Main Access 200601T 12 ページ。
Main Access 200601T にも：組立説明書 (7 ページ)

Step 21: Pool Installation

Note: Two people are required for installation.

A total weight of approximately 100 lbs. is

required to keep the step from floating once in

place under water. With the assistance of

another person, carefully place the step in the

pool. Place two sealed bags of sand (not

included) into the ballast bags (M) and over the

ballast tray (D) to weigh the step down. Walk the

step back against the pool wall to prevent swim-

behind hazards.

*Optional* Purchase (2) Anchors (#200888) to weigh

down the iStep. Sand not inlcuded.

For Questions Regarding Installation, Please Contact Main Access Customer Service

Be Sure to Check Out Other Great Products From Main Access!

Model #200601T Assmebly Instructions

Step 22: Deck Mount Installation

With the step in position, with 6"-8" of the pool

wall, slide the deck connectors (H) into position

on either the pool top rail or pool deck. Secure

to the deck with two #8 x 1" screws (N). Use a

minimum of two screws per deck connector.

Secure each deck connector (H) to each upper

handrail (E1) by using a single #8 x 1" screw.

All Finished!