- ページ 3
チューナー Dynojet PV3-2204CのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Dynojet PV3-2204C 7 ページ。
ページを印刷するINSTALLING THE POWER VISION
DIAGNOSTIC PORT
DIAGNOSTIC PORT
GETTING STARTED
Use the Tune File Wizard to prepare your Power Vision
device with the stock (stk) and tune (djt) files needed to
flash your vehicle.
1
Connect the Power Vision to the vehicle.
2
Turn the key on. The Power Vision will scan for files.
There are three possible file states:
File State 1: No compatible tune or stock files.
File State 2: No compatible tune files.
File State 3: All required files found.
3
Gauges are displayed.
Connect the Power Vision to the
vehicle diagnostic port to collect
ECU information. Turn the key on.
1
Secure the Power Vision to the vehicle using the supplied
Velcro. Make sure the Power Vision will not interfere with
the operation and steering of the vehicle.
Visit
www.dynojet.com
for your Power Vision.
Note: The Power Vision does not need to be mounted
to the vehicle, however, the Power Vision provides
a window into your vehicle. Mount the Power Vision
to your dashboard or handlebars and gain access to
customizable full-color gauge screens, along with
data logging and troubleshooting screens.
2
Attach the diagnostic cable to the diagnostic port on the
Power Vision and to the diagnostic port on the vehicle.
The diagnostic port is located under the seat.
Note: Yamaha uses a 4-pin white connector or a
6-pin red connector.
3
Affix the supplied CARB E.O. label to a conspicuous area.
Next to the original emissions label is a good location.
On many of these models this is on the downtube of the
frame. Make sure to clean the surface before attaching.
When done riding, be sure to unplug the Power
Vision to avoid draining the battery.
File State 1:
Go to
tunes.dynojet.com/
download stock and tune files.
File State 2:
Go to
tunes.dynojet.com/
download tune files.
File State 3:
All required files found. The Power
Vision is ready to flash a tune to the
connected vehicle.
for an array of mounting solutions
to
to
3