- ページ 10

ネットワーク・ハードウェア HIKOB GATEWAY H-GW103D-GのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。HIKOB GATEWAY H-GW103D-G 12 ページ。
HIKOB GATEWAY H-GW103D-G にも：インストレーション・マニュアル (11 ページ), クイック・スタート・マニュアル (2 ページ)

ページを印刷する

HIKOB GATEWAY

Document version 2017V2-EN

4.2 HIKOB GATEWAY power supply

The HIKOB GATEWAY is powered via Ethernet using the PoE technology (Power over

Ethernet) based on the 802.3af-2003 and 802.3af-2009 standards. This allows both data and

power delivery over category 5e or better cables. So ideally your site has an Ethernet network

carrying cables providing PoE.

If your site does not provide a connection insuring the standard PoE technology, then

you need to use a PoE injector that must be compliant with the 802.3af-2003 and 802.3af-

2009 norm. This standard ensures interoperability between your power sourcing equipment

and the powered device HIKOB GATEWAY.



The PoE connector stamped OUT goes to the HIKOB GATEWAY.



The PoE connector stamped IN goes to your IP network.



You supply the PoE injector with cables and plugs following your country / area

safety directives for electrical devices.

4.3 Outdoor deployment

The HIKOB GATEWAY is suitable for outdoor use: the envelope has maximum protection

against dust ingress, and is water resistant (IP65).

In case of an outdoor installation and power for the HIKOB GATEWAY is supplied by

a PoE injector, you will have to pay attention to the standard safety rules installing

electrical devices outside..

Most likely you'll need a technical electrical enclosure to host the PoE, and to supply

power. Some PoE are sold to be useable outdoor, some are sold with an extra IP66

enclosure, when choosing your equipment, pay attention to the 802.3af-2003 and 802.3af-

2009 compatibility and to operating temperatures as well. HIKOB has some product

references to advise, ask our vendors.

Consider as well other alternatives: you can have the HIKOB GATEWAY installed

outside, and the PoE inside.

2017 · Page 10/12