- ページ 13

ゲートオープナー Dea Ghost 100/CLのPDF 取扱説明書および警告をオンラインで閲覧またはダウンロードできます。Dea Ghost 100/CL 17 ページ。 Underground electro-mechanical operator for swing gates

This guide has been prepared for the final users of the automatism; the installer is required to deliver this gui-

de and illustrate its contents to the person in charge of the system. The latter must then provide similar instruc-

tion to all the other users. These instructions must be carefully conserved and easily available for consultation

when required.

Good preventive maintenance and frequent inspection ensures the long working life of the product. Contact

the installer regularly for routine maintenance and in event of anomaly.

1. Always keep a safe distance from the automatism during operation and never touch any moving part.

2. Prevent children from playing near the automatism.

3. Perform the control and inspection operations prescribed in the maintenance schedule and immediately stop

using the automatism whenever signs of malfunction are noted.

4. Never disassemble parts of the product! All maintenance and repair operations must be performed only by

qualified personnel.

5. The release operation must sometimes be performed in emergencies! All users must be instructed on the use

of the release mechanism and the location of the release keys.

WARNING Disconnect the power supply from the control panel before releasing the operator. In case you

cannot turn the power off, you will necessarily have to re-lock the motor in the position in which it was

unlocked.

All GHOST 100 models are equipped with a release device which must be operated as follows:

1. Disconnect the power supply;

2. Use the manual release key to unlock the gate (Pic. 6), the operator is unlocked and the gate can move freely.

To lock the gate, bring the gate on the lever assembly which will lock the spring device and brings GHOST 100

in working condition.

WARNING: During this operation gate may present uncontrolled movement: operate with extra care so to

avoid any risk.

The only operation that the user can and must do is to remove branches, leaves, and any other object that

might obstruct the gate's free movement. Warning! Always disconnect the power supply whenever performing

operations on the gate!

DEA SYSTEM S.p.A. - Via Della Tecnica, 6 - ITALY - 36013 PIOVENE ROCCHETTE (VI)

tel. +39 0445 550789 - fax +39 0445 550265 - Internet http:\\www.deasystem.com - e-mail: [email protected]

INSTRUCTIONS FOR THE FINAL USER

SAFETY RULES

GHOST 100 RELEASE MECHANISM

CLEANING AND INSPECTIONS