- ページ 7

錠前 Corbin Russwin Access 800のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Corbin Russwin Access 800 16 ページ。 Cl33800 tcac2 series cylindrical lockset
Corbin Russwin Access 800 にも： 取付説明書 (17 ページ), プログラミング指導 (16 ページ)

ページを印刷する
Corbin Russwin Access 800 取付説明書
7
Outside Escutcheon Installation
1A. For fire rated doors feed ribbon cable connector and ground wire from outside escutcheon
through the fire stop plate.
1B. For non-fire rated door applications, optional gaskets may be used as a weather seal
between the escutcheon and the door surfaces. An optional conduit is also available for
further protection. Feed ribbon cable connector and ground through the conduit (if used).
2. Slide the outside escutcheon over the lock, and hold the escutcheon to the door surface.
C A U T I O N
DOOR MUST REMAIN OPEN
DURING INSTALLATION.
USE DOOR STOP.
Installation Instructions
Gasket
(optional)
6
GASKET APPLICATION:
Peel off the adhesive protective paper from
gasket. Feed Keypad ribbon cable and ground
wire through gasket opening as shown and firmly
press gasket to escutcheon, aligning edge of
gasket with the edge of the escutcheon.