- ページ 10

ドッキングステーション Gamber Johnson 7160-0377のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Gamber Johnson 7160-0377 10 ページ。 Military docking station

Installing the CF31

computer into the dock

Step 1: Make sure the sliding door, located on the back surface

of the computer, has been opened to expose the computers'

docking connector.

Step 2: Make sure the power switch on the dock is in the "OFF"

position. Panasonic does not recomend "Hot-Docking" the

Toughbook computers.

Make sure no loose or foreign objects are on the surface of the

dock, the connector cover is mounted in the storage location on

the side of the dock, and the slide plate is in the forward

location.

Step 3: Place the front edge of the computer into the dock. The

pocket on the front edge of the computer will fit onto the hook on

the front edge of the dock.

Step 4: Lower the back edge of the computer down onto the slide

plate and guide pins.

Step 5: Push the slide plate with computer, back onto the docking

connector.

Step 6: Rotate the wing turn compression latch 180 degrees

clockwise. The alignment marks on the latch will align when the

latch is in the compressed state. A padlock with a 9/32" diameter

shackle can be used to help secure the computer to the docking

station.

Step 7: Turn "ON" the power switch on the dock to connect power

to the unit.