- ページ 5

ドッキングステーション Gamber Johnson 7160-0883-00のPDF インストレーション・インストラクションをオンラインで閲覧またはダウンロードできます。Gamber Johnson 7160-0883-00 5 ページ。 Cradle dell rugged laptop

1. If the cradle is in the closed position,

push the latch button to open the

latch.

2. Insert the front of the DELL laptop

under the front hooks on the cradle,

such that the tabs on hook goes into

the pockets in the laptop. Look at the

handle to make sure the front of the

computer is centered on the front

hooks.

3. Lower the back of the laptop down

onto the cradle and the docking

connector.

4. Lightly press down on the back of

the laptop (center) to ensure it is fully

seated while closing the latch.

5. The rear hook will engage the back

of the computer to hold it in place.

TO UNDOCK THE COMPUTER

1. Press the Latch Button. The front

latch is spring loaded and will

automatically open.

Lightly press down on the back of the

laptop (center) and the rear hook will

retract from the laptop.

2. Lift the back of the computer off the

cradle and docking connector.

3. Pull the front of the laptop out from

under the front hooks.

DOCKING THE COMPUTER

SCREEN SUPPORT ACCESSORY

A screen support (7110-1213), is

recommended for installations in

environments with high vibration.

*screen support (7110-1213) sold seperately

Attach the screen support to the cradle using

#6 screws(2x) provided in the hardware bag.

The screen support could be attached on

either side of the cradle.

5/5