- ページ 7
デジタルカメラ Cordex TOUGHPIX DIGITHERMのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cordex TOUGHPIX DIGITHERM 11 ページ。 Digital imaging camera
Cordex TOUGHPIX DIGITHERM にも： ユーザーマニュアル (9 ページ), ユーザーマニュアル (9 ページ)
ページを印刷するIMAGE REVIEW
Image Review
Displays the stored CAPTURED, VISIBLE and IR images for review.
•
View mode review shows the actual CAPTURED image with overlay
•
Temperature scale and colour bar displayed for images with IR content
The memory card empty icon is displayed when no memory card is present.
The joystick is used to navigate the stored images.
•
RIGHT and LEFT: moves through the stored images as CAPTURED.
•
UP and DOWN: selects either CAPTURED, VISIBLE or IR image.
•
PRESS (short): selects full screen display of the currently displayed image.
UP and DOWN: selects CAPTURED, VISIBLE or IR image
CAPTURED image shows temperature min/max with any user SPOT or BOX.
•
PRESS (long): enters the Delete Image menu.
CANCEL: re-enter the Image Review.
DELETE: deletes the image from the memory card.
WIFI
WIFI access point activation.
•
ENABLE WIFI: select NOW to enable, PRESS (short) to exit WIFI access point.
When WIFI access point is enabled the display shows the following:
•
CAMERA SSID IS DISPLAYED: used to identify the camera for selecting WIFI
connection.
•
CAMERA IP ADDRESS: used by browser to display web-page.
•
FW: WIFI firmware revision.
WIFI image review and download can be performed in Zone 1 and Zone 2 areas with
certified equipment. Refer to the section on the Web browser for image review
using a browser.
RUGGED
AUTHORITY
CAMERA SETUP
Time and Date
Used to setup the cameras date and time.
•
YEAR: select current year.
•
MONTH: select current month.
•
DAY: select current day.
•
HOUR: select current hour.
•
MINUTE: select current minute.
•
SECOND: select current second.
•
TIME ZONE: select current time zone offset (hours).
Firmware and Alignment
Both WIFI and camera system firmware are uploaded form this menu.
Displays the current FIRMWARE for the camera. See WIFI for the
module firmware.
Displays the camera serial number: 8-digit Hexa-decimal number.
•
UPDATE FIRMWARE: Camera system firmware update.
Press NOW to update firmware.
•
UPDATE WIFI: WIFI firmware update.
Press NOW to update firmware.
•
ALIGN: IR and VISIBLE image alignment.
Arrows are used to align the IR and VISIBLE images.
Separate instructions for firmware updates will be issued along with the firmware
update file.
TOUGHPIX DIGITHERM – User Manual
Document Reference CDX8950-532 Rev. B
13