- ページ 6

室内装飾品 Mainstays MS18-D2-1011-08のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Mainstays MS18-D2-1011-08 16 ページ。 4 shelf tower book shelf

Tools required (not provided): Phillips screwdriver, stud finder, power drill and 3 mm/0.1 in drill bit.

6. Ask for assistance to lift the unit upright and position it at the desired location against a wall. If

necessary, adjust the pre-attached floor levelers at the bottom of the Side Frames (A) to level the unit.

7. Follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach

the tip-over restraints to the unit and the wall.

NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be

attached to a wall stud. Depending upon your wall construction, different anchor hardware maybe

required. Please contact your local hardware store for assistance. Young children can be seriously

injured by tipping furniture. You must install the Tipping Restraint Hardware with the unit to

prevent the unit from tipping, causing any accidents or damage. The tipping restraints are intended

only as a deterrent, they are not a substitute for proper adult supervision. The tipping restraints are

not earthquake restraints. If you wish to add the extra security of earthquake restraints, they must be

purchased and installed separately.

8. The book shelf is now ready for use.

Assembly Instructions