- ページ 11

エアコン Gree Multi21 CONS18HP230V1AFのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Gree Multi21 CONS18HP230V1AF 18 ページ。

ページを印刷する

OPERATION OF REMOTE CONTROLLER (Continued)

Under COOL or HEAT mode, press this button to turn to

quick COOL or quick HEAT mode. " " icon is displayed

on remote controller. Press this button again to exit

turbo function and " " icon will disappear. This function

will allow the unit to run at very high fan speed to reach

the desired temperature.

• Press " " or " " button to increase or decrease the

set temperature 1 °C(2°F). Hold " " or " " button for 2

Sec, set temperature on remote controller will change

quickly. Temperature indicator on indoor unit will

change accordingly.

• When setting T-ON, T-OFF or CLOCK, press " " or " "

button to adjust time. (Refer to CLOCK, T-ON, T-OFF

buttons)

Press this button to select left & right swing angle.

Fan blowing angle can be selected circularly as below:

NOTE

• Press this button continuously more than 2s, the

louver will swing back and forth from left to right,

when you release the button, the louver will stop

swinging at its present position.

• Under left and right swing mode, when the status

is switched from off to

again for 2s and

status will switch to off status;

pressing this button again for 2s, will change the

swing status according to the sequence shown

above.

• This function is not available for this unit

Press this button to select up & down swing angle. Fan

angle can be selected circularly as below:

, pressing this button

M I NI -F LOO R CO NS OLE A SE RIESOWNERS M ANUAL - INDOOR UNIT

• Select " ", to select automatic fan circulation.

Horizontal louver will automatically swing up & down

at maximum angle.

• Select "

", and fan modulation will stop at

that fixed position. Horizontal louver will stop at the

fixed position.

• Select "

", will not modulate but blow at a fixed

angle.

• Hold " " button more than 2s to set your required

swing angle. When reaching your desired angle,

release the button.

NOTE

• Pressing this button continuously for more than

2s, the louver will swing back and forth from up to

down, release the button, will stop the louver at the

desired position.

• Under up and down swing mode, when the status is

switched from off to

for more than 2s will turn off the

again within 2s, will change the swing status to the

diagram above.

• T-ON button

"T-ON" button will set the time for timer on. After

pressing this button, " " icon disappears and the

word "ON" on remote controller blinks. Press

" " or " " button to adjust T-ON setting. After each

pressing " " or " " button, T-ON setting will increase

or decrease 1min. Hold " " or " " button, 2s longer

and the time will change quickly until reaching your

desired time. Press "T-ON" to confirm. The word

"ON" will stop blinking. " " icon resumes displaying.

Cancel T-ON: If T-ON is initiated, press "T-ON" button

to cancel it.

• T-OFF button

"T-OFF" button will set the time for timer off. After

pressing this button, " " icon disappears and the

word "OFF" on remote controller blinks. Press " " or

" " button to adjust T-OFF setting. After each press

of the " " or " " button, T-OFF setting will increase or

decrease 1 min. Holding the " " or " " button for more

than 2s the time will change quickly until reaching

your desired time. Press "T-OFF" and "OFF" will

stop blinking. " " icon resumes displaying. To cancel

T-OFF when it's on, "T-OFF" button to cancel it.

. Pressing this button again

status. Pressing

| 1 1