無線アクセスポイント Airespace AS 1500のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Airespace AS 1500 15 ページ。 Intelligent rf ap
ページを印刷するAS 1500 Intelligent RF AP Quick Installation Guide
Multi-Antenna Airespace Access Point Quick Installation Guide
This Guide contains several sections allowing you to install an AS 1500 (AS-1500-ABG-INT) Airespace
Access Point. This model contains internal 802.11a and 802.11b/g antennas and no connectors for
optional external antennas.
•
Overview
•
Step 1: Collecting Required Tools and Supplies
•
Step 2: Configuring the Airespace AP Before Installation
•
Step 3: Preparing Mounting Locations
•
Step 4: Mounting the Airespace APs
•
Step 5: Returning MAC Information
•
Planning Notes
•
FCC Statements for Airespace APs
ATTENTION!
Special Considerations
While Airespace Access Points have been engineered for easy installation, there are some guidelines
that are very important to the end users:
•
PLACE Airespace Access Points NO MORE THAN 140 FEET APART FROM EACH OTHER. Placing
Airespace APs further apart almost always results in poor coverage.
•
DO NOT MOUNT Airespace APs OUTSIDE BUILDINGS.
•
DO NOT MOUNT Airespace APs ON BUILDING PERIMETER WALLS UNLESS THE OPERATOR
WANTS TO PROVIDE COVERAGE OUTSIDE THE BUILDING.
•
MAKE SURE that plenum-mounted Airespace APs are powered using Power Over Ethernet (POE)
and use only the metal brackets (not the Ceiling-Mount Base or the Hanging-Ceiling Clips) to
comply with safety regulations.
•
MAKE SURE THAT THE Airespace Access Points ARE INSTALLED VERTI-
CALLY. Airespace Access Points ARE DESIGNED TO BE INSTALLED
VERTICALLY, either standing up in a plenum or hanging from a ceiling,
to create the largest coverage area per Airespace AP. Hanging the
Airespace AP from the ceiling provides the best RF coverage.
12/29/04
90-100tbd-000 Rev 1 (Preliminary 3)
Print This Document
© 2004 All Rights Reserved.
PRELIMINARY 3
System Release x.x