- ページ 16

ホイールバランサー AGT INDUSTRIAL AGT-WB24のPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。AGT INDUSTRIAL AGT-WB24 18 ページ。

3
4
5
6
7
8
9
10
SEVEN. Trouble shooting
★In normal standby mode, press
key to exit.
Screen displayed
Test order
1
2
3
4
5
6
EIGHT. Parameter setup
1 .Tire is with no pressure.
2
.Tire distortion is out of range
1. Position sensor is something wrong.
2. Computer panel is something wrong.
1 .Travel switch is something wrong.
2. Computer panel is something wrong.
1 .Power panel is something wrong.
2 .Computer panel is something wrong.
1.
Customer data lost.
2.
Computer panel is something wrong.
1.
100g
lead
not
self-calibration.
2 .Computer panel is something wrong.
3 .Power panel is something wrong.
1 .Travel switch is something wrong.
2. Computer panel is something wrong.
1 .Computer panel is crashed.
2 .Power panel is something wrong.
at the same time to enter in ,press
and
Function name
Testing start
Position sensor
Distance ruler sensor
( optional)
Diameter ruler sensor
( optional)
Width ruler sensor (optional)
Pressure sensor
1 .Mounting the tire and inflate it.
2 .Check the tire.
1. Check or replace position sensor
2. Check or replace computer panel.
1.Check or replace travel switch.
2.Check or replace computer panel.
1.Check or replace power panel.
2. Check or replace computer panel.
1.Self-calibration again.
2. Check or replace computer panel.
added
after
1 .Self-calibration again.
2. Check or replace computer panel.
3. Check or replace power panel.
1. Check or replace travel switch.
2. Check or replace computer panel.
1 .Check or replace computer panel.
2. Check or replace power panel.
key to perform next testing ,press
Function normal definition
Rotate main shaft, vary from 0-64
Value showed in window varies 327-335
when pull out the ruler
Value showed in window varies 327-335
when rotate the ruler rod to the other
Value showed in window varies 327-335
when rotate the ruler rod to the other
Value varies from 4X-4X to 6X-6X when you
press the main shaft.
All lights are on
direction
direction
16