- ページ 8
プールヒーター GAME SolarPRO 4721のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。GAME SolarPRO 4721 12 ページ。 Curve heater
GAME SolarPRO 4721 にも： オーナーズマニュアル (13 ページ)
ページを印刷する
Hose to
Pool
Collar
Hose Clamp
Hose Adapter
Reducer
(if needed)
Hose to
Pool
Collar
Flat Gasket
2.125" (5.4 cm) dia
O-Ring
Hose Adapter
40mm
3. SolarPRO – Pool Connections
NOTE: If your pool is plumbed with heavy-duty, reinforced flex hose, contact your local pool retailer or
visit www.amazon.com/GAMELLC for an available GAME adapter kit (item 4553).
A) Pools with 32mm-38mm Diameter Unthreaded Hoses
Connect the hose adapter into the SolarPRO port. Secure with the collar. Attach the filter hose and secure with a hose clamp. Repeat on
the other side of the SolarPRO, connecting the return hose to the pool. Use Teflon Tape on all threaded connections. See figure 2.
OR
B) Pools with 40mm Diameter Threaded Hoses
Connect the hose adapter into the SolarPRO port. Secure with the collar. Attach the 40mm adapter (use flat gasket as shown if needed)
to the SolarPRO port. Be sure the O-ring is in the adapter before attaching. Attach the filter hose and secure with a hose clamp. Repeat
on the other side of the SolarPRO, connecting the return hose to the pool. Use Teflon Tape on all threaded connections. See figure 3.
NOTE: If the location of the SolarPRO unit is further away from the pool than the current hose(s) length will allow, longer
hose(s) are required.
CAUTION: ENSURE ALL HOSE CONNECTIONS ARE TIGHT AND THE HOSES ARE NOT KINKED OR BENT AT SEVERE ANGLES. IF
THE HOSES ARE LEAKING, CHECK TO MAKE SURE ALL OF THE PARTS THAT HAVE O-RINGS HAVE THEM ATTACHED AND ARE
SCREWED ON TIGHTLY, AND HAVE TEFLON TAPE APPLIED TO THE THE THREADS.
SAVE THESE INSTRUCTIONS
O-Ring
Pools with 32mm-38mm Unthreaded Hoses
O-Ring
Pools with 40mm Threaded Hoses
Figure 2
Figure 3
8
O-Ring
Collar
Hose Adapter
Hose Clamp
Reducer
(if needed)
Collar
Flat Gasket
2.125" (5.4 cm) dia
O-Ring
Hose Adapter
O-Ring
40mm
Hose from
Filter/Pump
Hose from
Filter/Pump