- ページ 10
おもちゃ Deagostini MODEL SPACE Honda CB750 FOURのPDF 組立マニュアルをオンラインで閲覧またはダウンロードできます。Deagostini MODEL SPACE Honda CB750 FOUR 16 ページ。 Pack 12
Deagostini MODEL SPACE Honda CB750 FOUR にも： 組立マニュアル (16 ページ), 組立マニュアル (20 ページ), 組立マニュアル (16 ページ), 組立マニュアル (16 ページ), 組立マニュアル (16 ページ), 組立マニュアル (16 ページ), 組立マニュアル (16 ページ)
ページを印刷する
Honda CB750 FOUR: Assembly Guide
STEP
5
5
Tape the battery box cover down to keep it
in position.
Stage complete
266
Filling joins
The join between the two crankcase halves can be quite visible at certain points. The steps below show how to
conceal these areas.
A
You will need a small paintbrush,
light and medium grey paints, paint
thinner, a mixing dish, some putty
and a paper towel.
D
Use the putty and paint mixture
to fill in the joins, such as those
circled above.
B
Mix the grey paints and the paint
thinner to make a colour that
matches that of the crankcase.
E
Leave the mixture to dry for around
15 minutes, then wipe the joins with
a paper towel to remove the excess.
C
Mix some putty in with the paint.
F
The putty may take a few days to dry
completely. When it has dried, check
the areas again – if the joins are still
noticeable, then apply more of the
mixture and repeat the process until
the joins are fully concealed.