- ページ 4
おもちゃ Deagostini MODEL SPACE Honda CB750 FOURのPDF 組立マニュアルをオンラインで閲覧またはダウンロードできます。Deagostini MODEL SPACE Honda CB750 FOUR 16 ページ。 Pack 12
Deagostini MODEL SPACE Honda CB750 FOUR にも： 組立マニュアル (16 ページ), 組立マニュアル (16 ページ), 組立マニュアル (20 ページ), 組立マニュアル (16 ページ), 組立マニュアル (16 ページ), 組立マニュアル (16 ページ), 組立マニュアル (16 ページ)
ページを印刷する
Honda CB750 FOUR: Assembly Guide
5
Locate the holes in
the right frame half
(Stage 36). Check
the holes for any burrs or pieces of flash
left over from the casting process, such
as those circled in the inset.
9
Repeat the process to combine another
type G screw and washer.
228
6
Use a file to remove any burrs or flash
you have found in the holes.
10
Take the fuel tank base and align the
projections with the corresponding
holes on the underside of the frame half,
as indicated by the arrows.
7
Insert a type G screw into one of
the washers.
11
Push the projections into the holes.
8
Turn the screw into the washer.
12
Tighten one of the type G screws with
washer attached (from Step 9) into the
hole nearer the front of the frame half.