ページを印刷する
ASSEMBLY INSTRUCTIONS
ALWAYS make sure the unit is unplugged before beginning assembly!
NEVER move or clean the heater, or change the bulbs, while it is plugged in.
A
1) Carefully turn the STOVE (A) upside down and lay it on a clean soft surface.
2) Thread three SCREWS (C) through the holes in the leg, and into the stove frame.
Partially tighten with a Phillips screwdriver.
3) Repeat Steps 2 and 3 for the other three legs.
4) Check the alignment and tighten all 12 screws securely with the screwdriver.
(Remark: There are two extra screws in the screw bag as spare parts)
ALWAYS attach the feet before using! NEVER plug in or operate this unit if
the feet are not securely attached!
C
C
www.aflamo.pl/en/
5