パーソナルケア製品 Game ready 590810のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Game ready 590810 2 ページ。 Hand wrap - sleeve #590810 hand wrap - coverlet #590815

ページを印刷する

Warning: Always consult with your physician before using the Game Ready

System for an injury.

Caution: Do not place directly against open wounds, sores, rashes, infections,

or stitches. First place a sterile dressing on the wound and then apply the Wrap.

If pressure is uncomfortable, pause unit, and restart with lower pressure. Do not

store in closed plastic bag after use, as this will promote mold growth. Do not

puncture Wrap, doing so will void Game Ready warranty.

Care: Single-Use Coverlets are intended to be used once then discarded.

Sleeve care; gently remove Heat Exchanger from the Sleeve. Hand or machine

wash the sleeve in warm water and mild detergent, or antibacterial soap. Hang

to dry. Hand wash the Heat Exchanger, do not machine wash. See Control Unit

User's Manual for more detail. Cold sterilization only.

Warranty Information:

Sleeve and Coverlet: In case of manufacturer defect, Sleeve or Coverlet may

be returned within 7 days of purchase.

Heat Exchanger: 1 year from date of purchase. See warranty card included

with Heat Exchanger.

1201 Marina Village Pkwy, Suite 200.

Game Ready 2008

Hand Wrap - Sleeve

Hand Wrap - Coverlet #590815

Hand Single-Use Coverlet: #510815

Hand Sleeve: #510810

*Hand Heat Exchanger: #520810

*Fits both sleeve types

CoolSystems, Inc.

Alameda, CA 94501

1-888-GAMEREADY

#590810

Hand Wrap Application

(Coverlet)

Position the Hand Wrap with

disposable Coverlet on your hand with

the Logo side facing out. (Blue side

against your skin)

(Sleeve)

Detach the securing straps on one side

of sleeve. Position the Hand Wrap with

Sleeve on your hand with the Logo side

facing out. (Blue side against your skin)

Note: You may position the Hand Wrap

in many different positions on your

hand, however be sure NOT to kink,

twist or distort the Heat Exchanger as

this may restrict water and air flow.

Hand Wrap - Sleeve

Hand Wrap - Coverlet #590815

Next, wrap a bandage around both the

Next, connect the hose fitting to the

Hand Wrap and your hand, securing

Heat Exchanger fitting. (Fitting and

the Hand Wrap to your hand. (Do not

connector fit together in one way only)

overtighten)

Listen for an audible click for a secure

fit.

Next, stretch the securing straps

Next, connect the hose fitting to the

around both the Hand Wrap and your

Heat Exchanger fitting. (Fitting and

hand and secure to your hand by

connector fit together in one way only)

applying the hook near the Logo. (Do

Listen for an audible click for a secure

not overtighten)

fit.

Note: When positioning the Hand

This versitile wrap can be positioned

Wrap over any area of your hand,

on your hand in many positions to

ensure to keep the Heat Exchanger

deliver cold and compression therapy.

fitting accessible to connect the hose.

(Illustration shows Hand Wrap folded

over the outside ridge portion of hand)

#590810

702911 Rev B