- ページ 3

ビデオゲームアクセサリー Game ready ATXのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Game ready ATX 6 ページ。 Full leg boot for use with grpro 2.1 system and med4 elite system

ページを印刷する

FULL LEG BOOT WRAP APPLICATION

Application of the Full Leg Boot should always be performed with the assis-

tance of a second person. To prevent injury, never attempt to apply the Wrap

to yourself.

Apply the Wrap with a uniformly close fit, ensuring there are no kinks which

may impede water flow. Ensure the connector hose is placed to prevent the

Wrap from folding or kinking at the hose inlet location of the Wrap.

Place the Full Leg Boot flat on the floor or on a

therapy table.

The Full Leg Boot ships with the boot section

already formed.

Fold the wrap around the ankle and secure on the

opposite side of the leg.

Place the affected

foot into the lower

section of the boot with

the heel in the

designated area.

Fold the loop side across the top of the leg,

ensuring there are no wrinkles in the fabric and

that it's tight against the leg.

Attach the Wrap to the Control Unit with the Connector Hose. There should be an audible "click" . To

disconnect, simply press the blue or gray button and remove the connector from the Wrap.

To remove the Wrap, unhook the leg portion first, then unhook the foot portion. Set the Wrap away

from the body.

NOTE: Always have the Wrap applied while either sitting or lying

down with your legs straight.

The Full Leg Boot may be applied to either the left or right leg.

Fold the wrap across the top of the foot and

secure on the opposite side of the foot.

NOTE: Never cover the toes when

applying the Full Leg Boot.

Fold the hook side across the top of the leg in

the other direction, ensuring there are no

wrinkles in the fabric and that the wrap is tight against

the leg.

3 of 6