- ページ 6

防犯カメラ HIKVISION D8T SeriesのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。HIKVISION D8T Series 12 ページ。 Turbo hd turret camera
HIKVISION D8T Series にも：ユーザーマニュアル (17 ページ), ユーザーマニュアル (17 ページ), ユーザーマニュアル (17 ページ), ユーザーマニュアル (12 ページ), ユーザーマニュアル (16 ページ), ユーザーマニュアル (15 ページ), ユーザーマニュアル (17 ページ)

Note:

The supplied screw package contains self-tapping



screws, and expansion bolts.

For cement ceiling, expansion bolts are required to



fix the camera. For wooden ceiling, self-tapping

screws are required.

5. Route the cables through the cable hole, or the side

opening.

6. Connect the corresponding cables, such as power

cord, and video cable.

7. Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

8. Fit the bubble back to the camera.

9. Tighten the screws on the bubble of the dome

camera to finish the installation.

2.2 Wall Mounting of Type I and Type II Camera

Before you start:

You need to purchase a wall mount first.

Figure 2-3 Attach the Back Box

Figure 2-4 3-Axis Adjustment

Figure 2-5 Fit the Black Liner Back

Figure 2-6 Finish Installation