- ページ 10

回転する車輪 Majacraft Pioneer XのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Majacraft Pioneer X 11 ページ。

At this point screw the flyer on to the flyer shaft. It

may help to hold the pulley with your left hand and

tighten the flyer with your right (assuming you are

right handed).

When looking at the wheel from the front (the pedal side), loop

the brake tension band over the top of the bobbin from the

right hand side over to the left hand side. Refer to the Majacraft

Spinning Manual for a more thorough description on setting the

tension.

Spring is directed toward the

right hand side of the bobbin

Firstly slide the bobbin on to the flyer shaft.

It is time to put on the tension knob and spring. Start by sliding

the loop on the tension spring onto the tension knob shaft. Use

the spring loop that does NOT have the brake band attached. Now

slide the tension knob into the hole on the head.

Here is a more detailed image of the

arrangement of the tension spring.

majacraft