- ページ 7

キッチン家電 Adexa HLC300のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Adexa HLC300 13 ページ。 Vegetable cutter

ページを印刷する
Adexa HLC300 取扱説明書
UK
Changing the Cutting Disc
WARNING: The blades on the cutting disc are sharp. Take care to avoid the edges when changing discs.
1.
Disconnect the appliance from the mains power supply.
2.
Turn the lid release knob anti-clockwise.
3.
Remove the food pusher (if inserted) and carefully lift the lid.
4.
Turn the disc anti-clockwise and lift it away from the appliance. This may require a sharp tap to free it from the
shaft.
5.
Slot the new disc in place. Turn the disc if necessary to drop it in place over the lugs.
Note: Ensure the appliance is clean and free from food debris when changing discs to ensure the disc can
be securely fitted.
6.
Turn the disc clockwise to secure it in position.
7.
Lower the lid and turn the lid release knob clockwise to secure it in place.
Note: The deflector can also be removed by following this procedure. Removing the deflector is necessary
to thoroughly clean the appliance.
Using the Base Discs
Some cutting processes require two discs
to be inserted into the appliance.
1.
Open the lid and remove the cutting disc(s), as described above.
2.
Slot the desired base disc onto the appliance.
Note: The base cutting disc is not perfectly circular and has a
lip that sits in the cutter mouth to keep it securely in place.
3.
Slot the 8 or 10mm slicing disc on top of the base disc, ensuring it is
securely connected to the centre pin and spins freely.
WARNING: Only the thinner aluminium cutting discs are
suitable for use with the base discs. DO NOT use the
thicker plastic cutting discs.
4.
Lower the lid and turn the lid release knob clockwise to secure it in
place.
Cleaning, Care & Maintenance
•
Always turn off and disconnect the appliance from the power
supply before cleaning.
•
Use soapy water and a damp cloth to clean the appliance and cutting discs.
•
DO NOT wash the cutting discs in the dishwasher.
•
Dry thoroughly after cleaning.
•
Ensure all foodstuffs are removed from the appliance after each use.
•
If required, lift the cover and loosen the two Lid Release knobs to remove the lid and clean.
7