- ページ 4

調理器 Adexa ZH-RS80のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Adexa ZH-RS80 6 ページ。 Gas tilting braising pan

Instruction Manual

2.1.3 gas, nozzle, conversion

※The gas and pressure in different areas are different. Please switch the nozzle according to the

local gas pressure.

Nozzle size

Gas

Liquefied petroleum gas

Natural gas

Artificial gas

Oil gas

Note: This data is for reference only and is not intended to be standard data.

2.2 Technical characteristics

structure:

※ Made of high quality stainless steel.

※Good adhesion, no food residue.

※With safety protection thermocouple line.

※ Adjustable firepower.

※ Adjustable high quality stainless steel feet.

※The burner is a steel tube that can be used as a self-stabilizing flame.

※The nozzle can be changed for different gases.

※The gas switch valve made of brass has safety devices and thermocouples to prevent air leakage

and prevent fire.

※ The gas switch valve knob is die-cast with bakelite and is an insulator that can prevent heat.

3、Installation requirements and precautions

※All installation and operation must be carried out by qualified persons in accordance with

regulations.

3.1 Installation requirements

※Because the machine is heavy, please consider the weight of the machine during installation. We

recommend that you install it on the ground.

※When installing: The machine must be 10cm away from the wall. In case the machine needs to

be installed against the wall, the wall must be fireproof to prevent burning.

※ The installation location should be in a well-ventilated place, and the exhaust fan should be

installed to ensure that the steam and the burned exhaust gas are discharged during the working

process.

※After the installed machine, it must be kept stable. It should not be tilted horizontally and it is

impossible to shake it when using it.

※Because the gas is supplied by the gas supplier before installation, it is verified that the supplied

gas is the same as the gas used in the future.

※Do not use other gases that do not conform to the machine for fuel and high and medium

Φ1.4mm

Φ2.6mm

Φ3.5mm

Φ2.3mm