- ページ 13

ソウ CentralPneumatic 68832のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。CentralPneumatic 68832 17 ページ。 3” composite air cut-off tool

user-maintenance Instructions

Procedures not specifically explained in this manual

must be performed only by a qualified technician.

TO PREVEnT SERIOuS InjuRY FROm ACCIDEnTAl OPERATIOn:

Turn off the tool, detach the air supply, safely discharge any

residual air pressure in the tool, and release the throttle before

performing any inspection, maintenance, or cleaning procedures.

TO PREVEnT SERIOuS InjuRY

FROm TOOl FAIluRE:

Do not use damaged equipment. If abnormal noise, vibration, or

leaking air occurs, have the problem corrected before further use.

TO PREVEnT SEROuS InjuRY FROm ExPlOSIOn:

Lubricate the tool only with specified lubricants. Lubricate the air

inlet using only pneumatic tool oil. Other lubricants may damage the

mechanism and may be highly flammable, causing an explosion.

Cleaning, maintenance, and lubrication

note: These procedures are in addition to the regular checks and maintenance

explained as part of the regular operation of the air‑operated tool.

Daily - Air Supply maintenance:

Every day, perform maintenance on the air supply according to the component

manufacturers' instructions. The lubricator's oil level needs to be maintained and the

moisture filter must be regularly drained. Performing routine maintenance on the air

supply will allow the tool to operate more safely and will also reduce wear on the tool.

If the vanes need replacement, all vanes should be replaced as a set.

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy

DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER

OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE

BUYER THAT HE OR SHE IS qUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR

THAT HE OR SHE IS qUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE

MANUFACTURER AND/OR DISTRIBUTOR ExPRESSLY STATES THAT ALL REPAIRS AND PARTS

REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,

AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF

HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,

OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

SKU 68832

For technical questions, please call 1-800-444-3353.

Page 13