- ページ 3
キッチン家電 Brisker Products Electric CrisperのPDF 操作説明をオンラインで閲覧またはダウンロードできます。Brisker Products Electric Crisper 4 ページ。
ページを印刷する
BEFORE YOU PLUG IN YOUR BRISKER
ALSO REMEMBER TO ACTIVATE YOUR WARRANTY ONLINE AT WWW.BRISKER.COM.
BRISKER
PLACING YOUR
Place your BRISKER Electric Crisper on a level
surface. If the door appears to be crooked, the
surface is not level.
DO NOT PUT IT IN THE FOLLOWING LOCATIONS:
Next to your range - when your range is "on", the
high heat will damage the end caps.
Directly under an air conditioning or heating vent,
or in direct unfiltered sunlight. The BRISKER
Electric Crisper may become inefficient.
Out of doors or anywhere it could get wet - it's
electric.
Inside a poorly ventilated cabinet or closet.
HOW IT WORKS
An energy-efficient, low-wattage electric heater is
completely encased in the insulated aluminum floor.
Aluminum is a superior conductor of heat and the
low-wattage heater (which uses barely more
electricity than alarm clocks) maintains the floor at
approximately 120°F. This is slightly cooler than a
drinkable cup of coffee.
The heated floor causes the air inside the BRISKER
Electric Crisper to remain in the high 90's, thus
removing humidity. If you put your finger on the floor,
it will feel warmer to you than 120°F. This is because
aluminum is such an efficient conductor of heat, it
feels warmer than it really is.
There are no switches or thermostats to adjust.
ALLOW 15 MINUTES AFTER YOU PLUG IT IN
BEFORE THE FLOOR WILL BEGIN TO FEEL
WARM.
OPENING THE DOOR WITH ONE HAND
The BRISKER Electric Crisper door is hinged at the
bottom and is held tightly closed by a magnetic strip
located inside the top of the door. Air slots along the
door sides provide adequate ventilation.
To easily open the door with one hand, do the
following; place your fingers under the door handle
and pull toward you. At the same time, press with
your thumb against the housing just above the door.
This allows you to easily overcome the magnet's
locking strength.
OPERATING INSTRUCTIONS
FOLLOWING.
ELECTRIC CRISPER
ELECTRIC CRISPER, PLEASE READ THE
®
WHAT TO PUT IN YOUR
CRISPER
Almost any DRY food that you want to stay crisp,
crunchy and humidity-free - cereal, chips, crackers,
croutons, nuts, popcorn, pretzels, etc. Leave the food
box or bag open so the warm air can get inside and
do its job. Many owners remove the bag from the
box.
WHAT NOT TO PUT IN IT
The BRISKER Electric Crisper is NOT A
BREADBOX! Soft, moist bread, rolls, cake, etc.,
will become dry and crunchy.
Some snacks that have a high oil content or very
strong flavor may change flavor or transfer their
flavor if left in the BRISKER Electric Crisper for an
extended period of time.
Do not put cereal that contains raisins or fruit
chunks in the BRISKER Electric Crisper. The fruits
will become hard.
Your BRISKER Electric Crisper is not a warming
oven. Its low wattage heat was designed to
eliminate humidity, not to warm food.
HOW TO FILL IT
Always locate smaller boxes or bags vertically (not
horizontally) so that the warm air from the floor can
flow up between them. Put larger boxes horizontally
on top of the smaller ones. DO NOT PUT A LARGE
BOX HORIZONTALLY ON THE BRISKER FLOOR. It
will block the heat flow.
CLEANING
The housing and door are made of brushed stainless
steel. The floor is made of aluminum. Window glass
cleaners usually work quite well inside and out for
routine cleaning. Never immerse it in water or wash it
with a "wet" cloth. Always unplug and allow it to cool
before cleaning inside. SEE UL IMPORTANT
SAFEGUARDS. Never coat the inside with any type
of polish as a residue may remain and react
adversely when heated.
STORAGE (OFF SEASON)
If you do not use your BRISKER Electric Crisper all
year, be sure to store it in a dry (not damp or humid)
location.
BRISKER
ELECTRIC