- ページ 5

冷凍庫 Jägermeister SHOTMEISTERのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Jägermeister SHOTMEISTER 8 ページ。

Pouring Shots from your

When pouring ice cold shots from your Jägermeister Shotmeister, pull

the tap handle towards you. When done pouring, push the tap handle

back to the center position, ensuring the valve is closed.

Note: If the tap handle is not completely vertical, Jägermeister may

continue to flow from the tap in a slow stream.

1. Turn off machine and remove the bottle

2. Drain remaining Jägermeister liqueur from the machine

3. Fill empty Jägermeister bottle with warm water, install a bottle

stopper, and insert into machine

4. Pull on tap handle and drain out all warm water from bottle

5. Repeat step 4 until the water exiting the machine is clear

6. Remove drip tray and tip machine towards you, raising the back a few

inches, pulling the tap handle to ensure all water has drained from

the machine

7. Make sure to clean all used bottle stoppers

Note: Cleaning should take place after machine has not been used

for an extended period of time, or once every 6 months.

It is normal for frost to appear in the freezer. To remove the layer

of frost, simply turn off the freezer and let it sit while the frost melts.

The frost will automatically drain out of the freezer. It is recommended you

place a towel under the freezer in case of seepage.

It is normal to experience a layer of frost up to 1/8" inch thick.

ALWAYS CHECK TO MAKE SURE THE LID IS CLOSED FIRMLY

RETAIN YOUR ORIGINAL BOX AND PACKING

MATERIALS FOR A PERIOD OF 1 YEAR.

THESE ITEMS ARE NEEDED IF YOUR FREEZER

REQUIRES SERVICE OR REPAIRS.

For information on requesting service or repairs, visit:

Shotmeister Machine

Cleaning Instructions

In Case of Frost