- ページ 13

コントロールユニット BriskHeat ACR 3 MiniPRO Hot BonderのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。BriskHeat ACR 3 MiniPRO Hot Bonder 14 ページ。

ページを印刷する

Change Language:

This function changes the displayed language. The ACR
either English or German (Deutsch).
NOTE: This function requires a shut down and reboot.
1.
Access the SYSTEM menu.
2.
Touch LANGUAGE, SPRACHE button..
3.
Select Language or Cancel.
4.
Press OK to shut down hot bonder.
5.
Flip the red main power switch to the OFF position. The main power switch
is not illuminated when off.
6.
Flip the red main power switch to the ON position. The main power switch is
illuminated when on.
7.
Software now displays desired language.

Change Administrator Password:

This function permanently changes the administrator password: Requires
administrator password.
1.
Touch the SYSTEM tab at the top of the screen.
2.
Touch the PASSWORD ADMINISTRATION button.
3.
Touch the ENTER ADMINISTRATOR PASSWORD field. A keyboard screen
appears.
4.
Type your administrator password. Touch the ENTER button when
complete.
NOTE: Factory default password is "BHT".
5.
Touch the ENTER NEW PASSWORD field. A keyboard screen appears.
6.
Type your new administrator password. Touch the ENTER button when
done.
7.
Touch the RE-ENTER NEW PASSWORD field. A keyboard screen appears.
8.
Re-type your new administrator password. Touch the ENTER button when
done.
9.
Touch the UPDATE ADMIN PASSWORD button.
NOTE: System is in administrator mode until the hot bonder is shut down.
See Shut Down System on page 24 to shut down system.

Delete All Program Passwords:

®
© BriskHeat
Corporation. All rights reserved.
®
ACR
3 MiniPRO™ Hot Bonder
®
MiniPRO™ displays
25
This function deletes all program passwords stored in the ACR
administrator password.
1.
Touch the SYSTEM tab at the top of the screen.
2.
Touch the PASSWORD ADMINISTRATION button.
3.
Touch the ENTER ADMINISTRATOR PASSWORD field. A keyboard screen
appears.
4.
Type your administrator password. Touch the ENTER button when
complete.
NOTE: Factory default password is "BHT".
5.
Touch the DELETE ALL PROGRAM PASSWORDS button.
6.
Touch OK button to confirm.
NOTE: System is in administrator mode until the hot bonder is shut down.
See Shut Down System on page 24 to shut down system.

Factory Settings:

®
This function is for BriskHeat
factory only. It sets up the initial parameters.

CLEANING AND DECONTAMINATION

Clean only with a damp cloth and mild detergent, exterior only. No water should
penetrate the enclosure.

EQUIPMENT MAINTENANCE

Return to factory for repair, annual calibration, or maintenance. Contact factory at
1-800-848-7673 (toll free, U.S. / Canada) or 614-294-3376 for complete details.
®
© BriskHeat
Corporation. All rights reserved.
®
ACR
3 MiniPRO™ Hot Bonder
®
3. Requires
26