ページを印刷するⅤ. Installation instruction
1. All the electrical power unit and circuit connection must be installed by qualified
electrician with safety standard.
2. Connection must be based on requirement.
3. Make sure the rubber feet have been installed securely.
4. Product should be placed in a well ventilated room on solid platform, and we
suggest to leave at least 10cm space between the product and the wall or barriers.
Also place the product away from the combustible materials and equipped with
fire extinguisher.
5. Remove the packaging film off the surface.
6. The power wire should be connected in accordance with electrical safety
standards. Make sure the voltage and frequency conform to the parameter. And
please install a double pole switch before connection. When the product working,
the voltage error should be under ±10% (PS: the product must be connected to
ground.)
7. Connect the cable to the power supply fixed by using a screwdriver according to
the connection diagram, then loosen the screw inside the power point and plug the
cable in, make sure the sheet copper compress the power line tightly. If the
connection is incorrect, it may cause joint heating and burning off the power cord.
Ⅵ. Operation instruction
1. Turn on the power supply.
1.1 Preheating is necessary before baking food.
1.2 The temperature of the oven can be adjusted between 0~350℃.
1.3 Turn the timer clockwise to the desired time, then the indicator light on and
the heating element starts working, when it reaches the set temperature, the
indicator light off. If the temperature is below the set temperature, the heating
element will be automatically reheated and the indicator light on.
1.4 The internal lighting can help monitoring the baking process.
1.5 Cooking time depends on the amount of the food, the more the food had, the
longer the time required.
1.6 Please turn off the power if not using.
Ⅶ. Warning
1. If you want to clean、repair or move the machine, please pull out the plug first.
2. Please don't touch the switch or plug with wet hand.
3. The machine can't be flushed directly, and please be careful don't let the water
flow into the switch when cleaning.
4. Keep the children from touching or using the machine.
5. The ground wire must be connected, all the connection must be reinstated after
maintenance.