- ページ 5
室内装飾品 IKEA BEKANTのPDF マニュアルをオンラインで閲覧またはダウンロードできます。IKEA BEKANT 12 ページ。 Desk
IKEA BEKANT にも： インストール手順 (20 ページ), マニュアル (40 ページ)
ページを印刷する
Installation instructions
— The table is assembled according to
separate assembly instructions.
— Connect the cable from one leg to
the other. Connect the hand control
to one of the leg and the power-
supply to the other leg. The cables
to the legs, hand control and power
supply should be placed in the ac-
companying net. Place the electrical
cables so that they do not get dam-
aged, see assembly instruction.
— Connect the electrical cable to a wall
socket.
NB! The electrical cable must have
full mobility.
— Insert the safety key in the socket on
the hand control.
— The table is now ready for use. The
motors stop automatically when the
table reaches its lowest and highest
position respectively.
Usage of the table
— The table shall only be used as a
working table with the possibility to
continuously adjust working height
between sitting and standing posi-
tion. The table shall only be used
indoors and in dry premises (office
environment or similar).
— The table must not be overloaded -
maximum load is 70 kg. The mo-
tors may be run continuously for
maximum 1 minutes. Afterward, the
motors must stand by for approx.
9 minutes before they can be used
again.
Follow these instructions
when adjusting table height:
1. Insert the safety key in the socket on
the hand control.
2. Make sure no objects are in the way
of the table adjusting height freely.
3. In order to run the table up/down,
press the manoeuvre button with an
arrow pointing up and down respec-
tively.
Safety regulations
— When the table is run up/down,
keep the necessary safety distance
to avoid the risk to get squeezed
between the moving table top and
fixed objects in the surrounding
area.
— When the table is run up/down
the user shall keep watch so that
nobody is injured or no object is
damaged. The table top must not
bump into a fixed object so that the
table is overturned. Always remove
any office chair before the table is
run up/down.
— When the table is left unattended,
the safety key must be removed
from the hand control and placed
out of reach of children.
— The table tripod must not be altered
or reconstructed in any way. In
service and repair work of the table,
the electrical cable must always be
disconnected from the wall socket.
— Alterations to the control box are
absolutely forbidden!
— The table must not be used as a
hoisting device for persons.
5